Uchi Embedded Solutions

Choosing the Right Muscle for Your Machine A practical, engineer's-eye guide to picking between electric and pneumatic linear actuators and why Actuonix electrics are the right call for most precision builds. Every automated machine needs something that actually does the moving the part that pushes a gate shut, lifts a valve, extends a gripper, or nudges a part into place. That job almost always falls to a linear actuator. The two workhorses in this space are electric and pneumatic actuators,...

Most Embedded design that boots from an external SPI NOR or NAND flash device eventually runs into the same operational question: how do you get firmware onto that chip quickly, reliably, and repeatably — during bring-up, in a production line, and in the field for rework or recovery? DediProg's SF600Plus-G2 is built specifically to answer that question. What the SF600Plus-G2 Is The SF600Plus-G2 is a high-speed serial NOR and NAND flash programmer that supports two operating modes: In-Circuit...

Two USB in-circuit serial programmers from ASIX — same software ecosystem, same GO button, very different silicon under the hood. Here's what matters when you must pick one. Two Tools, One Software Stack ASIX has offered a pair of USB programmers for over a decade — PRESTO (on the market since 2004) and the higher-end FORTE (introduced in 2012). Both support hundreds of microcontrollers, serial EEPROMs, Flash chips, CPLDs, and FPGAs. Both run on the same UP software suite under Windows XP...