Binho Pulsar - Multi-Protocol USB Host Adapter
The wide-protocol USB host adapter — six digital buses on dedicated pins, USB 2.0 High Speed link to the host PC, in a machined-aluminum enclosure.
The Binho Pulsar USB Host Adapter allows one to interface a PC directly to hardware circuits. Featuring a USB 2.0 High Speed 480 Mbps link to the host, the Pulsar offers an unmatched value proposition in the test tool market. The Pulsar features a modern USB Type-C port, 5× RGB LEDs for visual status indication, and a variety of DUT-facing connections all in a compact, robust machined-aluminum enclosure including integrated mounting holes.
The host adapter is able to communicate on many digital buses: I2C, SPI, UART, RS-485, 1-Wire, and CAN-FD. All of these protocols are implemented on their own dedicated pins and can be operated simultaneously. A bank of 6× dedicated digital GPIO pins can be assigned to other related or unrelated purposes such as GPIO, interrupts, resets, chip selects, etc, as well as operating as digital PWM outputs.
Specifications
- SPI: 50 MHz controller, 4× CS
- I2C: 1 MHz controller, configurable pull-ups
- UART: 115200 baud, with HW flow control
- RS-485: −7 to +12 V common-mode, half-duplex
- CAN-FD: 5 Mbps optimized for 12 V systems
- 1-Wire: 3.3 / 5 V standard + overdrive
- GPIO: 6 pins dedicated, configurable
Target use-cases
- Device driver development
- Firmware development & verification
- Proof-of-concept development
- Automated HW / FW testing
- FLASH & EEPROM programming
Product Contents
- 1× Binho Pulsar USB Host Adapter
- Differential Port Kit: 1× 4-pin JST PH cable with female headers, 1× 4-pin JST PH cable with male headers
- Dedicated I2C Port Kit: 1× 4-pin JST SH (Qwiic-compatible) to 4-pin JST SH cable, 1× 4-pin JST SH (Qwiic-compatible) cable with male headers, 1× 4-pin JST SH (Qwiic-compatible) cable with female headers
- Multifunction Port Breakout Kit: 1× 30-conductor IDC ribbon cable, 1× ribbon cable to 2.54 mm pitch header breakout board
- USB Kit: 1× USB Type-C to Type-A cable, 1× USB Type-A to Type-C adapter
- Mounting Kit: 2× mounting screws, 2× washers
- 1× Custom protective zippered carry case
Fill the form below for best price